Limited Stock***. Order Securely Now with Next Day & Tracked Delivery Options Available. Great Deal and Fast Tracked Delivery. Order this Brand New Arctic P12 Max High-Performance 12cm PWM Case Fan, Dual Ball Bearing, 200-3300 RPM, 0dB Mode, Black. Part Number: ACFAN00280A.
High-performance 120 mm PWM Fan
Fan Speed: 200–3300 RPM
0 RPMbelow 5 % PWM
Airflow: 81.04 cfm | 137.69 m3/h
Static Pressure: 4.35 mm H2O
Noise Level: 0.6 Sone
RPM-Control: Pulse Width Modulation – PWM
Fan Bearing: Dual Ball Bearing
Typical Voltage: 12 V DC
Start Up Voltage: 3.9 V
Current: 0.29 A
Cable Length: 400 mm
Connector: 4-Pin Connector
Extremely Wide Speed Range
Building up on the success of the P12 PWM, the P12 Max extends the controllable speed to an impressively wide range from 200 RPM up to 3300 RPM. This enables a quiet operation when low airflow is needed and also an unprecedented level of performance on heatsinks and radiators. The P12 Max provides a significant performance boost to existing air and water cooling solutions.
Maximum Performance - Without Compromises
The P12 Max delivers focused airflow and high static pressure, making it suitable for all scenarios. The fan is optimised for use on radiators, heat sinks, pinholes and mesh. Therefore, the P12 Max is the ideal fan for enthusiasts and professionals who are looking for maximum performance with a long service life.
0dB Mode - Zero RPM
The fan speed can be throttled down to standstill via PWM. This allows silent operation in IDLE and at the same time guarantees maximum performance when required. Thus, the P12 Max allows an incomparably dynamic adjustment of the speed, so that the airflow can be perfectly regulated for every case.
Improved Stability
The P12 Max features a closed fan wheel design. The advantage of this fan wheel combination is a pressure stability without compromise. In scenarios with high pressure resistances and higher speeds, the force effect is distributed uniformly over the entire fan wheel and enables low-vibration rotation while maintaining high static pressure.
Maximum Smoothness, Minimum Vibration
Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable. Due to a sinus-magnetizing the new motor only creates about 5 % of the vibration from commutation of a regular DC-motor without filter. The rubber pads mounted at the corners additionally dampen the residual vibrations caused by the higher revolutions.
Designed for Continuous Operation
The premium quality of the dual ball bearing allows 24/7 continuous operation without compromising performance. Contamination and high temperatures affect this bearing much less than ordinary sleeve or ball bearings. Therefore, the dual ball bearing is the perfect choice if you want to ensure continuous operation at maximum speed. Please note that ball bearings have a physically higher bearing noise compared to conventional sleeve bearings.
.
Description
Specification
Type: 12cm Case Fan
Fan Connector(s): 4-pin
Installation: Mounting Screws
#Hide#LED Lighting: No
Colour: Black
LED Lighting: -
Weight: 184 g
Fan Dimensions: 120 x 120 x 25 mm Cable Length: 400 mm
Fan Controller: PWM
Rotation Speed: 200 - 3300 RPM 0 RPM below 5% PWM
Fan Bearing: Dual Ball Bearing
Air Flow: 81.04 cfm
Noise level: 0.6 Sone
Power: Typical Voltage: 12 V DC Start Up Voltage: 3.9 V Current: 0.29 A
Limited Stock***. Order Securely Now with Next Day & Tracked Delivery Options Available. Great Deal and Fast Tracked Delivery. Order this Brand New Arctic P8 Max High-Performance 8cm PWM Case...
Limited Stock***. Order Securely Now with Next Day & Tracked Delivery Options Available. Great Deal and Fast Tracked Delivery. Order this Brand New Arctic 12cm P12 Pressure Optimised PWM PST ARGB...
